Meeting 4: working on the counterweight

May 17, 2013
Step 13:
We placed 4 3-pound weights in the marked center of the small dowel, and marked two lines where the holding screws would go.
Step 14:
After taking off the weights, we drilled a hole on one of the lines, and another on the opposite side of the other line.
 Step 15:
After replacing the weights, we screwed two screws into the holes with some of the screw still coming out to hold the weights in place.
Step 16:
we used rope to tie both sides of the dowel to the end of the mid-arm with the small hole (opposite of the hooks and sling)