Meeting 3: Working on the sling

May 16, 2013
Step 8:
we cut two pieces of string out so they both equal 24 inches.
Step 9:
we cut out a piece of cloth to about the size that would hold a water balloon, hole-punched to holes on opposite sides of the rectangular piece.
Step 10:
after that, we tied the ends of the string through the holes in the cloth.
Step 11:
On the piece that is being used as a mid-arm of the catapult, we drilled two holes in the middle and top of the very end of the wood. Then we screwed in the closed hook in the middle hole and the open hook on the top.
Step 12:
We tied one of the ends of the string to the closed hook and the other was tied into a loose loop for the open hook.